If you're planning a bathroom renovation, the shower glass is often the detail that pulls the whole room together — and one of the easiest costs to misjudge. Here's the honest answer up front: in Toronto and the GTA, a frameless glass shower door or enclosure typically runs from about $850 for a single fixed panel to $5,000+ for a full custom enclosure, before HST.
Bottom line: most Toronto homeowners spend between $1,500 and $3,500 on a quality frameless shower door or enclosure, installed.
Shower Glass Price Ranges by Type
Use this table as a realistic starting point. Every installation is custom, so these are ranges, not fixed quotes.
| Type | Typical Installed Price (CAD) | Best For |
|---|---|---|
| Fixed tub screen (single panel) | $850 – $1,400 | Replacing a shower curtain over the tub |
| Frameless sliding shower door | $1,200 – $2,500 | Condos and tighter bathrooms |
| Frameless hinged / swing door | $1,500 – $3,000 | Standalone showers with room to swing |
| Neo-angle / corner enclosure | $1,800 – $3,500 | Corner showers, often with one fixed panel |
| Full custom frameless enclosure | $3,000 – $5,000+ | Large or walk-in master ensuites |
| Steam shower enclosure (sealed) | $4,000 – $6,500+ | Steam rooms requiring a full seal and vent |
The 5 Factors That Drive the Price
- Glass thickness. Standard is 10 mm tempered glass. Wide or tall spans (like a full-height door) need 12 mm, which costs more and adds weight.
- Size and layout. More panels, notches for sloped ceilings, or a walk-in design means more glass and more fabrication.
- Hardware finish. Matte black, brushed nickel, polished chrome and brass all sit at different price points. Premium finishes can add $100–$400.
- Configuration. A single fixed panel is far cheaper than a sliding or hinged door with rollers and hinges.
- Installation conditions. Out-of-plumb walls, tile already set, or an older home that needs reinforcement all affect labour.
Frameless vs semi-frameless: semi-frameless uses a slim frame to reinforce the structure, so it can cost 15–30% less than a fully frameless enclosure while keeping a clean, modern look.
How to Keep Costs Down Without Cutting Corners
- Choose a fixed panel or tub screen where the layout allows — it's the most affordable frameless option.
- Opt for 10 mm glass on standard spans instead of 12 mm.
- Select a standard finish (brushed nickel or chrome) rather than a premium brass or matte black.
- Measure once, order once — a professional laser measurement prevents costly remakes.
Get an Exact Quote
Every project is different, so the only way to know your real price is a quick on-site measure. We provide free, no-obligation quotes within 24 hours.